{"id":22898,"date":"2026-07-06T05:49:59","date_gmt":"2026-07-06T05:49:59","guid":{"rendered":"https:\/\/ergil.com\/?p=22898"},"modified":"2026-07-06T05:49:59","modified_gmt":"2026-07-06T05:49:59","slug":"rubber-grp-and-frp-lining-for-storage-tanks-and-pressure-vessels","status":"publish","type":"post","link":"https:\/\/ergil.com\/tr\/rubber-grp-and-frp-lining-for-storage-tanks-and-pressure-vessels\/","title":{"rendered":"Rubber, GRP and FRP Lining for Storage Tanks and Pressure Vessels"},"content":{"rendered":"

<\/div><\/div><\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>

Rubber, GRP and FRP Lining for Storage Tanks and Pressure Vessels<\/h1><\/div>

Storage tanks and pressure vessels are widely used in oil & gas, petrochemical, chemical processing, water treatment, mining, power generation, fertilizer, and industrial process facilities. In many applications, these equipment items are exposed to aggressive liquids, corrosive chemicals, acidic or alkaline solutions, seawater, wastewater, brine, solvents, abrasive slurries, and other demanding process media.<\/p>\n

Even when the main equipment body is designed and manufactured from carbon steel or stainless steel, the internal surface may require additional corrosion protection. This is where lining systems become critical. Rubber lining, GRP lining, and FRP lining are commonly used to protect storage tanks and pressure vessels against corrosion, abrasion, chemical attack, and process-related degradation.<\/p>\n

The correct lining system can significantly extend equipment service life, reduce maintenance costs, prevent product contamination, improve operational reliability, and protect the structural integrity of the tank or vessel.<\/p>\n<\/div><\/div><\/div>

Why Lining Is Required in Storage Tanks and Pressure Vessels<\/h2><\/div>

The main function of a lining system is to create a protective barrier between the process medium and the base material of the tank or pressure vessel. In many industrial applications, carbon steel is preferred for the main equipment body due to its mechanical strength, availability, fabrication efficiency, and cost advantage. However, carbon steel may not be chemically compatible with the stored or processed fluid.<\/p>\n

Without suitable internal protection, the equipment may suffer from:<\/p>\n

    \n
  • Internal corrosion<\/li>\n
  • Chemical attack<\/li>\n
  • Pitting and localized metal loss<\/li>\n
  • Abrasion and erosion<\/li>\n
  • Product contamination<\/li>\n
  • Leakage risk<\/li>\n
  • Reduced equipment lifetime<\/li>\n
  • Unplanned shutdowns<\/li>\n
  • Increased maintenance cost<\/li>\n
  • Safety and environmental risks<\/li>\n<\/ul>\n

    A properly selected lining system allows the equipment designer to combine the mechanical strength of the steel structure with the chemical resistance of the lining material.<\/p>\n<\/div><\/div><\/div>

    What Is Rubber Lining?<\/h2><\/div>

    Rubber lining is a corrosion protection method where rubber sheets are bonded to the internal surface of a storage tank, pressure vessel, scrubber, absorber, pipeline, or process equipment item. The rubber layer acts as a flexible protective barrier between the process fluid and the steel surface.<\/p>\n

    Rubber lining is widely used in chemical storage, water treatment, mining, fertilizer plants, acid handling, desalination, scrubber systems, slurry service, and aggressive process applications.<\/p>\n

    The rubber lining material is selected according to the chemical composition of the fluid, temperature, pressure, abrasion level, concentration, and service conditions.<\/p>\n<\/div><\/div><\/div>

    Common Types of Rubber Lining<\/h2><\/div>

    Several rubber materials can be used for industrial lining applications. Each type has different chemical resistance, mechanical behavior, temperature capability, and application suitability.<\/p>\n<\/div><\/div><\/div>

    Natural Rubber Lining<\/h3><\/div>

    Natural rubber provides excellent abrasion resistance and flexibility. It is commonly used in slurry handling, mining, water treatment, and applications where mechanical wear is a major concern.<\/p>\n

    It is especially suitable for abrasive services, but its chemical resistance must be carefully checked before use with aggressive chemicals.<\/p>\n<\/div><\/div><\/div>

    Hard Rubber Lining<\/h3><\/div>

    Hard rubber lining, sometimes referred to as ebonite-type lining, provides good chemical resistance in many acid and chemical applications. It is more rigid than soft rubber and is often used where chemical protection is more important than flexibility.<\/p>\n

    Hard rubber lining is commonly used in tanks, vessels, acid storage systems, and chemical process equipment.<\/p>\n<\/div><\/div><\/div>

    Butyl Rubber Lining<\/h3><\/div>

    Butyl rubber provides good resistance to acids, alkalis, and various chemical solutions. It also has low permeability compared to many other elastomers, making it useful for applications where chemical diffusion must be minimized.<\/p>\n

    Butyl rubber is often used in chemical storage tanks, water treatment equipment, scrubbers, and process vessels.<\/p>\n<\/div><\/div><\/div>

    EPDM Rubber Lining<\/h3><\/div>

    EPDM rubber has good resistance to water, steam, dilute acids, alkalis, and some chemical solutions. It is commonly used in water treatment, wastewater systems, and certain chemical storage applications.<\/p>\n

    However, EPDM is generally not suitable for hydrocarbons, oils, and many solvent-based services.<\/p>\n<\/div><\/div><\/div>

    Nitrile Rubber Lining<\/h3><\/div>

    Nitrile rubber is known for its resistance to oils, fuels, and certain hydrocarbon-based fluids. It may be used where resistance to petroleum products is required.<\/p>\n

    Its suitability must be evaluated carefully depending on temperature, chemical concentration, and fluid composition.<\/p>\n<\/div><\/div><\/div>

    Neoprene Rubber Lining<\/h3><\/div>

    Neoprene, also known as chloroprene rubber, provides moderate chemical resistance, weather resistance, and mechanical durability. It can be used in selected industrial applications where balanced chemical and physical properties are required.<\/p>\n<\/div><\/div><\/div>

    Advantages of Rubber Lining<\/h2><\/div>

    Rubber lining provides several important benefits for storage tanks and pressure vessels.<\/p>\n<\/div><\/div><\/div>

    Excellent Corrosion Protection<\/h3><\/div>

    Rubber lining creates a continuous barrier that prevents corrosive fluids from contacting the steel surface. This helps protect the equipment from internal corrosion and extends service life.<\/p>\n<\/div><\/div><\/div>

    High Abrasion Resistance<\/h3><\/div>

    In slurry, wastewater, mining, and solids-containing services, rubber lining can provide strong resistance against abrasion and mechanical wear.<\/p>\n<\/div><\/div><\/div>

    Flexibility<\/h3><\/div>

    Rubber lining has the ability to absorb mechanical stress, thermal movement, and vibration better than rigid lining systems. This flexibility can be beneficial in dynamic operating conditions.<\/p>\n<\/div><\/div><\/div>

    Repairability<\/h3><\/div>

    In many cases, damaged rubber lining areas can be locally repaired, depending on the extent of damage and service condition.<\/p>\n<\/div><\/div><\/div>

    Wide Application Range<\/h3><\/div>

    Rubber lining can be used in tanks, pressure vessels, scrubbers, absorbers, filter vessels, pipelines, agitators, ducts, and other process equipment.<\/p>\n<\/div><\/div><\/div>

    Limitations of Rubber Lining<\/h2><\/div>

    Rubber lining is not suitable for every application. Its limitations must be carefully considered during material selection.<\/p>\n

    Possible limitations include:<\/p>\n

      \n
    • Temperature restrictions<\/li>\n
    • Chemical compatibility limits<\/li>\n
    • Permeation risk with certain chemicals<\/li>\n
    • Sensitivity to improper surface preparation<\/li>\n
    • Requirement for skilled application<\/li>\n
    • Potential damage during installation or maintenance<\/li>\n
    • Limited resistance to some solvents and hydrocarbons, depending on rubber type<\/li>\n<\/ul>\n

      The success of rubber lining depends heavily on correct material selection, surface preparation, bonding quality, curing method, inspection, and service conditions.<\/p>\n<\/div><\/div><\/div>

      What Is GRP Lining?<\/h2><\/div>

      GRP stands for Glass Reinforced Plastic. It is a composite material made from glass fiber reinforcement and a polymer resin matrix. In lining applications, GRP is applied to the internal surface of a tank or vessel to provide corrosion protection and mechanical reinforcement.<\/p>\n

      GRP lining is commonly used in chemical storage tanks, water treatment systems, wastewater equipment, scrubbers, absorbers, ducts, process vessels, and industrial containment systems.<\/p>\n

      The resin system provides chemical resistance, while the glass fiber reinforcement provides mechanical strength.<\/p>\n<\/div><\/div><\/div>

      What Is FRP Lining?<\/h2><\/div>

      FRP stands for Fiber Reinforced Plastic. It is a broader term than GRP. While GRP specifically refers to glass fiber reinforcement, FRP may refer to fiber-reinforced composites using glass fiber, carbon fiber, aramid fiber, or other reinforcement types.<\/p>\n

      In most industrial tank and vessel lining applications, the reinforcement is glass fiber, so the terms GRP and FRP are often used interchangeably. However, technically, GRP is a type of FRP.<\/p>\n

      For storage tanks and pressure vessels, FRP lining usually consists of resin-rich corrosion barrier layers, glass fiber reinforcement layers, and a final topcoat or chemical-resistant finish.<\/p>\n<\/div><\/div><\/div>

      Common Resin Systems Used in GRP\/FRP Lining<\/h2><\/div>

      The performance of GRP or FRP lining depends strongly on the selected resin system. The resin must be compatible with the stored or processed medium.<\/p>\n<\/div><\/div><\/div>

      Polyester Resin<\/h3><\/div>

      Polyester resin is commonly used for general industrial applications where chemical resistance requirements are moderate. It is cost-effective and widely available.<\/p>\n

      However, it may not be suitable for highly aggressive chemicals or elevated temperatures.<\/p>\n<\/div><\/div><\/div>

      Vinyl Ester Resin<\/h2><\/div>

      Vinyl ester resin provides better chemical resistance than standard polyester resin. It is widely used in chemical storage, wastewater treatment, scrubbers, and aggressive industrial services.<\/p>\n

      Vinyl ester is often selected for acids, alkalis, salts, and many corrosive environments.<\/p>\n<\/div><\/div><\/div>

      Epoxy Resin<\/h2><\/div>

      Epoxy resin provides strong adhesion, mechanical strength, and good chemical resistance in selected applications. It is often used where bonding performance and mechanical durability are important.<\/p>\n

      Chemical compatibility must still be checked carefully, especially for strong acids, solvents, and elevated temperature service.<\/p>\n<\/div><\/div><\/div>

      Phenolic Resin<\/h2><\/div>

      Phenolic resin may be used in certain high-temperature or fire-resistant applications. It is less common than polyester, vinyl ester, and epoxy in general tank lining work, but it can be selected for specific industrial duties.<\/p>\n<\/div><\/div><\/div>

      GRP\/FRP Lining Structure<\/h2><\/div>

      A typical GRP or FRP lining system may include several layers, each with a different function.<\/p>\n<\/div><\/div><\/div>

      Primer or Bonding Layer<\/h2><\/div>

      The primer or bonding layer helps improve adhesion between the steel substrate and the composite lining system.<\/p>\n<\/div><\/div><\/div>

      Corrosion Barrier Layer<\/h2><\/div>

      The corrosion barrier is usually resin-rich and may include surface veil or chopped strand mat. This layer is designed to resist direct chemical exposure.<\/p>\n<\/div><\/div><\/div>

      Structural Reinforcement Layer<\/h2><\/div>

      The reinforcement layer provides mechanical strength and dimensional stability. It may include chopped strand mat, woven roving, or other glass fiber reinforcement.<\/p>\n<\/div><\/div><\/div>

      Topcoat or Final Resin Layer<\/h2><\/div>

      The topcoat provides the final chemical-resistant surface and helps protect the laminate from process media and environmental exposure.<\/p>\n<\/div><\/div><\/div>

      Advantages of GRP and FRP Lining<\/h2><\/div>

      GRP and FRP lining systems offer several advantages in industrial tank and vessel applications.<\/p>\n<\/div><\/div><\/div>

      Strong Chemical Resistance<\/h3><\/div>

      With the correct resin selection, GRP and FRP linings can provide excellent resistance to many acids, alkalis, salts, wastewater, seawater, and industrial chemicals.<\/p>\n<\/div><\/div><\/div>

      Lightweight Protection System<\/h3><\/div>

      Compared to metallic cladding or alloy construction, GRP and FRP lining systems provide corrosion resistance with relatively low additional weight.<\/p>\n<\/div><\/div><\/div>

      Good Mechanical Strength<\/h3><\/div>

      The fiber reinforcement gives the lining system mechanical stability and resistance to cracking, depending on laminate design and service conditions.<\/p>\n<\/div><\/div><\/div>

      Design Flexibility<\/h3><\/div>

      GRP and FRP systems can be applied to tanks, vessels, scrubbers, ducting, trenches, sumps, and complex internal geometries.<\/p>\n<\/div><\/div><\/div>

      Suitable for Large Surfaces<\/h3><\/div>

      FRP lining is suitable for protecting large internal surfaces, including tank floors, shell courses, roofs, vessel interiors, and containment areas.<\/p>\n<\/div><\/div><\/div>

      Limitations of GRP and FRP Lining<\/h2><\/div>

      GRP and FRP linings also have limitations that must be considered.<\/p>\n

      Possible limitations include:<\/p>\n

        \n
      • Sensitivity to improper resin selection<\/li>\n
      • Temperature limitations depending on resin type<\/li>\n
      • Risk of cracking under severe mechanical impact<\/li>\n
      • Requirement for controlled curing conditions<\/li>\n
      • Need for skilled laminate application<\/li>\n
      • Potential delamination if surface preparation is poor<\/li>\n
      • Chemical attack if the wrong resin system is selected<\/li>\n
      • Permeation risk under certain operating conditions<\/li>\n<\/ul>\n

        For pressure vessels, design evaluation is especially important because internal pressure, vacuum, thermal cycling, nozzle loads, and operating conditions may affect lining performance.<\/p>\n<\/div><\/div><\/div>

        Rubber Lining vs. GRP\/FRP Lining<\/h2><\/div>

        Rubber lining and GRP\/FRP lining are both used for corrosion protection, but they behave differently.<\/p>\n

        Rubber lining is flexible, impact-resistant, and highly suitable for abrasion and slurry services. It is often preferred where vibration, mechanical wear, or thermal movement must be absorbed.<\/p>\n

        GRP\/FRP lining is more rigid and composite-based. It is commonly preferred for chemical corrosion resistance, wastewater systems, scrubbers, and applications where resin-based chemical protection is suitable.<\/p>\n

        The correct choice depends on the actual service conditions. Neither system should be selected only based on cost. Chemical compatibility, temperature, pressure, abrasion, maintenance access, surface preparation, and expected service life must all be evaluated.<\/p>\n<\/div><\/div><\/div>

        Comparison Table<\/h2><\/div>
        \n\n\n\n\n\n\n\n\n\n\n\n
        \n

        Criteria<\/b><\/p>\n<\/td>\n

        		\n

        Rubber Lining<\/b><\/p>\n<\/td>\n

        		\n

        GRP \/ FRP Lining<\/b><\/p>\n<\/td>\n<\/tr>\n

        \n

        Main Function<\/span><\/p>\n<\/td>\n

        		\n

        Flexible corrosion and abrasion protection<\/span><\/p>\n<\/td>\n

        		\n

        Composite corrosion protection<\/span><\/p>\n<\/td>\n<\/tr>\n

        \n

        Mechanical Behavior<\/span><\/p>\n<\/td>\n

        		\n

        Flexible and impact absorbing<\/span><\/p>\n<\/td>\n

        		\n

        More rigid and laminate-based<\/span><\/p>\n<\/td>\n<\/tr>\n

        \n

        Typical Applications<\/span><\/p>\n<\/td>\n

        		\n

        Slurry, acids, water treatment, mining, scrubbers<\/span><\/p>\n<\/td>\n

        		\n

        Chemical tanks, wastewater, scrubbers, vessels, containment<\/span><\/p>\n<\/td>\n<\/tr>\n

        \n

        Abrasion Resistance<\/span><\/p>\n<\/td>\n

        		\n

        Very good, especially natural rubber<\/span><\/p>\n<\/td>\n

        		\n

        Moderate to good depending on resin and laminate<\/span><\/p>\n<\/td>\n<\/tr>\n

        \n

        Chemical Resistance<\/span><\/p>\n<\/td>\n

        		\n

        Depends on rubber type<\/span><\/p>\n<\/td>\n

        		\n

        Depends on resin system<\/span><\/p>\n<\/td>\n<\/tr>\n

        \n

        Temperature Resistance<\/span><\/p>\n<\/td>\n

        		\n

        Limited by elastomer type<\/span><\/p>\n<\/td>\n

        		\n

        Limited by resin system<\/span><\/p>\n<\/td>\n<\/tr>\n

        \n

        Repairability<\/span><\/p>\n<\/td>\n

        		\n

        Local repair possible in many cases<\/span><\/p>\n<\/td>\n

        		\n

        Local laminate repair possible<\/span><\/p>\n<\/td>\n<\/tr>\n

        \n

        Application Skill Requirement<\/span><\/p>\n<\/td>\n

        		\n

        High<\/span><\/p>\n<\/td>\n

        		\n

        High<\/span><\/p>\n<\/td>\n<\/tr>\n

        \n

        Surface Preparation Sensitivity<\/span><\/p>\n<\/td>\n

        		\n

        Very high<\/span><\/p>\n<\/td>\n

        		\n

        Very high<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div><\/div><\/div>

        Dual Laminate Systems<\/h2><\/div>

        Storage tanks may require rubber, GRP, or FRP lining depending on the stored medium and operating conditions.<\/p>\n

        Common storage tank applications include:<\/p>\n

          \n
        • Acid storage tanks<\/li>\n
        • Alkali storage tanks<\/li>\n
        • Wastewater tanks<\/li>\n
        • Brine storage tanks<\/li>\n
        • Seawater tanks<\/li>\n
        • Chemical storage tanks<\/li>\n
        • Slurry tanks<\/li>\n
        • Mining process tanks<\/li>\n
        • Demineralized water tanks<\/li>\n
        • Scrubber chemical tanks<\/li>\n
        • Process water tanks<\/li>\n
        • Effluent treatment tanks<\/li>\n<\/ul>\n

          In storage tank applications, lining selection must consider long-term immersion, vapor space exposure, filling and emptying cycles, sediment formation, cleaning requirements, and inspection access.<\/p>\n<\/div><\/div><\/div>

          Typical Applications in Storage Tanks<\/h2><\/div>

          In highly corrosive applications, dual laminate systems may be used. A dual laminate system combines a thermoplastic inner liner with an external FRP structural laminate.<\/p>\n

          The thermoplastic layer provides chemical resistance, while the FRP layer provides mechanical strength. Common thermoplastic liners may include materials such as PVC, CPVC, PP, PE, PVDF, or other chemically resistant plastics, depending on service requirements.<\/p>\n

          Dual laminate systems are often used in aggressive chemical storage, acid handling, chlorine-related services, scrubbers, absorbers, ducts, and process vessels.<\/p>\n

          This approach is especially useful when a single lining material cannot provide both chemical resistance and mechanical strength.<\/p>\n<\/div><\/div><\/div>

          Typical Applications in Pressure Vessels<\/h2><\/div>

          Pressure vessels may also require internal lining when the process medium is corrosive or erosive. However, lining selection for pressure vessels requires additional attention because the lining must perform under pressure, temperature, flow, and mechanical stress.<\/p>\n

          Common pressure vessel applications include:<\/p>\n

            \n
          • Scrubber vessels<\/li>\n
          • Absorber vessels<\/li>\n
          • Filter vessels<\/li>\n
          • Ion exchange vessels<\/li>\n
          • Process separators<\/li>\n
          • Chemical reactors<\/li>\n
          • Neutralization vessels<\/li>\n
          • Slurry vessels<\/li>\n
          • Water treatment vessels<\/li>\n
          • Acid handling vessels<\/li>\n
          • Degassing vessels<\/li>\n<\/ul>\n

            For pressure vessels, the lining system must be compatible with the pressure vessel design, nozzle arrangement, internals, inspection requirements, and operating cycle.<\/p>\n<\/div><\/div><\/div>

            Surface Preparation: A Critical Factor<\/h2><\/div>

            The performance of any lining system depends heavily on surface preparation. Even the best lining material can fail if the substrate is not properly prepared.<\/p>\n

            Typical surface preparation steps may include:<\/p>\n

              \n
            • Removal of oil, grease, and contaminants<\/li>\n
            • Abrasive blasting<\/li>\n
            • Achieving the required surface cleanliness<\/li>\n
            • Creating the required surface profile<\/li>\n
            • Dust removal<\/li>\n
            • Environmental condition control<\/li>\n
            • Primer application where required<\/li>\n
            • Inspection before lining application<\/li>\n<\/ul>\n

              Poor surface preparation may lead to blistering, delamination, weak adhesion, underfilm corrosion, and premature lining failure.<\/p>\n<\/div><\/div><\/div>

              Quality Control and Inspection<\/h2><\/div>

              Lining systems require strict quality control during and after application. Common inspection activities may include:<\/p>\n

                \n
              • Visual inspection<\/li>\n
              • Surface cleanliness check<\/li>\n
              • Surface profile measurement<\/li>\n
              • Environmental condition monitoring<\/li>\n
              • Thickness measurement<\/li>\n
              • Adhesion testing where applicable<\/li>\n
              • Holiday or spark testing<\/li>\n
              • Cure verification<\/li>\n
              • Hardness testing for rubber lining<\/li>\n
              • Laminate inspection for FRP systems<\/li>\n
              • Final documentation and inspection reports<\/li>\n<\/ul>\n

                For tanks and vessels used in critical service, lining inspection should be treated as an essential part of the manufacturing and quality assurance process.<\/p>\n<\/div><\/div><\/div>

                Common Causes of Lining Failure<\/h2><\/div>

                Lining failure is usually related to incorrect selection, poor application, or operating conditions outside the design limits.<\/p>\n

                Common causes include:<\/p>\n

                  \n
                • Wrong lining material selection<\/li>\n
                • Poor chemical compatibility<\/li>\n
                • Inadequate surface preparation<\/li>\n
                • Improper bonding<\/li>\n
                • Incorrect curing<\/li>\n
                • Mechanical damage during installation<\/li>\n
                • Excessive temperature<\/li>\n
                • Thermal shock<\/li>\n
                • Vacuum or pressure effects<\/li>\n
                • Abrasion beyond design limits<\/li>\n
                • Chemical concentration changes<\/li>\n
                • Poor maintenance or cleaning practices<\/li>\n<\/ul>\n

                  A successful lining system requires proper coordination between process engineering, mechanical design, material selection, manufacturing, application, inspection, and operation teams.<\/p>\n<\/div><\/div><\/div>

                  Key Selection Criteria<\/h2><\/div>

                  When selecting a rubber, GRP, or FRP lining system for a storage tank or pressure vessel, the following factors should be evaluated:<\/p>\n

                    \n
                  • Chemical composition of the fluid<\/li>\n
                  • Chemical concentration<\/li>\n
                  • Operating temperature<\/li>\n
                  • Design pressure or vacuum<\/li>\n
                  • Immersion or vapor exposure<\/li>\n
                  • Abrasion level<\/li>\n
                  • Solids content<\/li>\n
                  • Flow velocity<\/li>\n
                  • Cleaning method<\/li>\n
                  • Expected service life<\/li>\n
                  • Substrate material<\/li>\n
                  • Tank or vessel geometry<\/li>\n
                  • Nozzle and internal arrangement<\/li>\n
                  • Inspection and maintenance access<\/li>\n
                  • Repair strategy<\/li>\n
                  • Applicable standards and project specifications<\/li>\n<\/ul>\n

                    The most suitable lining system is always application-specific. A lining material that performs well in one service may fail quickly in another if process conditions are different.<\/p>\n<\/div><\/div><\/div>

                    Importance of Manufacturer Experience<\/h2><\/div>

                    Rubber, GRP, and FRP lining systems are not only material products; they are application-sensitive engineering solutions. Successful performance depends on experience in material selection, equipment design, surface preparation, application methods, curing, inspection, and documentation.<\/p>\n

                    For storage tanks and pressure vessels, the lining system should be considered during the design stage, not only after fabrication. Nozzle details, weld profiles, corner radii, internal supports, manways, access openings, and inspection requirements can all affect lining quality.<\/p>\n

                    Early coordination between the equipment manufacturer, lining applicator, engineering team, and end user helps reduce technical risks and ensures that the selected solution is suitable for the actual operating conditions.<\/p>\n<\/div><\/div><\/div><\/div><\/div><\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[22],"tags":[249],"class_list":["post-22898","post","type-post","status-publish","format-standard","hentry","category-case-studies-articles","tag-skid"],"_links":{"self":[{"href":"https:\/\/ergil.com\/tr\/wp-json\/wp\/v2\/posts\/22898","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ergil.com\/tr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ergil.com\/tr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ergil.com\/tr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ergil.com\/tr\/wp-json\/wp\/v2\/comments?post=22898"}],"version-history":[{"count":1,"href":"https:\/\/ergil.com\/tr\/wp-json\/wp\/v2\/posts\/22898\/revisions"}],"predecessor-version":[{"id":22899,"href":"https:\/\/ergil.com\/tr\/wp-json\/wp\/v2\/posts\/22898\/revisions\/22899"}],"wp:attachment":[{"href":"https:\/\/ergil.com\/tr\/wp-json\/wp\/v2\/media?parent=22898"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ergil.com\/tr\/wp-json\/wp\/v2\/categories?post=22898"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ergil.com\/tr\/wp-json\/wp\/v2\/tags?post=22898"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}